1 Snowboarding looks easy, do I really need a lesson? If you take a full-day, professional lesson to start, you will avoid hours of frustration and struggle on the slopes. A full-day lesson will show you the basics of getting started, ease you into turns and polish your technique as you begin to link turns. A two-hour lesson leaves you hanging without skills to ride the mountain.
2 Am I too old/young to get started? I have had 84-year-olds come through my snowboarding camp and seen many children learn to ride, although they had never been on skis before. Go for it at age seven.
3 What is the best board for me? If you are interested in carving smooth turns with no jumping, then look into a freecarving board model with a length that falls between your nose and the top of your head.
For all mountain riding and a solid performance in a wide variety of snow conditions, go for the freeriding board style. This is perfect for your first day on the slopes, the halfpipe or ripping up fresh powder. Buy a freeride model between your chin and nose in height.
For fun, look at a freestyle board. They are light and easy turning makes them easy to spin and ride in all conditions, but they are not known for durability or ability to deliver stability at speeds.
4 What is the best way to set up my bindings?
For a freestyle set-up, position your bindings slightly wider (centre to centre) than the distance from your elbow to your fingertips. Place your front binding 10-27 degrees forward, or positive angle, and your back binding positive as well. Position your bindings so that your toes hang over the edge slightly more than your heels. Adjust the forward lean of your front binding, located on your highback, forward - to increase the response and quickness of your heelside edge. Rotate the highback of the front binding to become near parallel to the heelside edge.
5 I have trouble stopping quickly, what's wrong?
If your legs are locked straight, your board will make a bounc ing, chattering attempt at stopping. The key to quick stops is being able to manage your board's pressure in the snow. Start with equal weight on both feet, when you will be pressuring the entire board into the snow. Now, you must apply your body weight through the board and on to the snow so that the edges grip. To do this, you must be able to lower your body mass on to the biting edge evenly and progressively. The legs will be flexing, allowing the weight of the body to pressure the edge and thus grip the snow and stop.
6 I can make turns easy to my heels, but I fall when I try to get to my toes. Why?
Learning to make a heelside turn is easier because your body will rotate into the turn, if only to see where you are going.
When it comes to making good toeside turns, first of all, slow down! On a heelside traverse, shift your weight (from 50/50) more to the front foot (70/30). Simply move your hips towards the nose of the board, which will then seek the fall line and begin the first half of the turn automatically. As you get going into the turn, rotate your head, shoulders, hips and knees into the same direction as the desired turn and stay on your front foot! Your board will come around effortlessly every time if you just remember the three simple steps: slow down, shift weight to front foot, rotate into the turn.
Avoid leaning into the turn or getting on to your back foot because of fear.
7 What should I work on to get better?
Learning to carve will help you ride longer with less effort and prepare you for riding powder. Aggressive short-radius turns are the only weapon against steep slopes, moguls, trees and crowds.
Develop your carving balance by tipping your board up on edge past 45 degrees. Start riding down the fall line. Tip the board up on edge and try to maintain that edge, without sliding, across the slope and back up the hill. Practise on both edges. To link carve turns together, repeat the process to get started but roll the board over to the downhill edge when you get to 45 degrees away from the fall line. If you are sliding and you try to get on to the downhill edge, you will crash. Make sure you are carving before you go to the next turn.
For aggressive edge-biting turns with an even tempo, try to find a rhythm in your head and keep the turn shape intact. The more you practise, the more you will gain strength and control over your board when the going gets rough.
8 I can survive jumps, but how do I get good board grabs?
When you jump, you still need to maintain a good riding foundation, which includes: 50/50 weight, flexed knees and ankles, straight back, arms at your sides with one hand on either side of the board, and eyes looking in the direction of travel. Notice hand position.
First the take off. Do not throw your hands into the air on every jump. Use your arms for balance only when you need them. On take-off, jump upward with your shoulders going skyward rather than your elbows. As you fly through the air, with the proper hand position, bring your board up under your body rather then reaching down for the rail. With decent hangtime, you will have your board in your hand with no effort, and - remembering to let go - land smoothly.
9 How do I learn to spin?
I suggest working on riding "fakie", or backwards, until you are comfortable turning and stopping. The obvious progression would be to start with a 180-degree rotation and move up 180 degrees at a time. That is why you want to learn to ride backwards first.
10 What is the secret to riding a halfpipe?
The secret to getting big air is not collapsing in the transition. You need to get set in the flat bottom in an aggressive stance with all the elements of a good foundation in place. As you enter the transition of the approaching wall, start to push gently with your legs to counter the force that is trying to get your legs to bend. If you bend at the legs in the transition, you will be slowing yourself down and losing speed required to launch out of the vertical.
• Kevin Delaney presents more tips at Board-it.com, the online snowboarding guide. Details of his worldwide snowboarding camps are on www.board-it.com/delaney